Electrical Solutions
Older wiring, brought up to a standard you can trust
Ageing panels and undersized circuits are the most common cause of electrical faults we are called to. We replace, rebalance and document — so the problem stops recurring.
What this covers
- Distribution board and consumer unit replacement
- Breaker and RCD/GFCI upgrades for shock and fire protection
- Load assessment and circuit rebalancing across phases
- Partial and full rewiring of homes and commercial premises
- Earthing and bonding inspection and correction
- Service upgrades and coordination with the utility connection
- Fault finding on circuits that trip, arc or run hot
Common problems
What we usually get called about
If one of these sounds familiar, it is a job we do regularly.
“The panel is rusted, warm to the touch or buzzing.”
How we handle it
We isolate, inspect and replace the board with correctly rated protection, and check the incoming service and earthing while we are there.
“Lights dim whenever the AC or pump starts.”
How we handle it
That is usually load imbalance or an undersized feed. We measure it, redistribute the circuits and size the cable to the actual draw.
“An insurer or bank wants confirmation the wiring is safe.”
How we handle it
We inspect, correct what needs correcting and provide a written report of the work carried out and the tests performed.
Our process
How a panels & rewiring job runs
Step 1
Inspection
We open up the board, test the circuits and measure the load across the installation.
Step 2
Findings & quote
You get a plain-language report of what is unsafe, what is marginal and what it costs to fix.
Step 3
Upgrade works
Replacement is planned around your operating hours to keep downtime short.
Step 4
Test & certify
Everything is re-tested, labelled and recorded in a report you can give to an insurer.
Questions
Panels & Rewiring — frequently asked
Straight answers, including the ones that might talk you out of the job.
How long will the power be off?
A straightforward board changeover is usually a few hours. For businesses we schedule outside trading hours or stage the work circuit by circuit — we will confirm the window before we start.
Do I need a full rewire or just a new panel?
Often just the board and a few circuits. A full rewire is only warranted when the cabling itself has degraded. We will show you what we found rather than selling you the larger job by default.
Can you provide a report for insurance purposes?
Yes. We document the condition found, the work carried out and the tests performed, and hand that over in writing at completion.
Related
Often needed alongside this
Jobs like yours usually involve one or two of these as well.
Electrical Installation & Wiring
Complete wiring for new builds, extensions and fit-outs — designed for the load you actually run, installed to code and documented.
Learn moreUPS & Power Protection
Uninterruptible power supplies, surge protection and earthing that stop voltage events from destroying expensive equipment.
Learn morePreventive Maintenance Contracts
Scheduled inspections, priority response and a documented service history — for facilities that cannot afford surprise downtime.
Learn moreNeed panels & rewiring? Tell us the details.
Describe the job in the form and we will reply within one business day. If it is an emergency, mark it as one and we will prioritise it.